Hiwonder HPS-2018 Full Metal Gear Digital Servo with 20kg High Torque

Hiwonder LD-20MG is a full metal gear standard digital servo with 20kg high torque, using aluminium case for Robotic RC Car with control angle 180 degrees.
Specification Specification Product weight 0.15Ib / 66g Product size 1.57*0.8*1.59inch / 40*20*40.5mm Rotation speed 0.20sec/60°(7.4V) Stall torque 20 kg·cm (277.6 oz·in) @7.4V Working Voltage 6-8.4V Stall current 2.4~3A No-load Current 100mA Servo Horn 25T Servo Wire 30cm(11.8inch) in length Control Method PWM pulse width control PWM pulse width range 500~2500us, corresponding to 0~180° Duty Ratio 0.5ms~2.5ms Pulse Period 20ms Wire Layout red wire: +; black wire: GND; white wire: PWM/signal Rotation range 0~180° Servo accuracy 0.3° 20kg Large Torque This servo boasts an impressive maximum torque of 20KG.CM 7.4V, enhanced by its accompanying metal servo arm. Delivering robust power, it is housed within an aluminum alloy casing that facilitates excellent heat dissipation, thereby effectively reducing power consumption. All Metal Gear This product showcases exceptional performance, minimal noise output, and the inclusion of metal gear and dual-ball bearings. By integrating a high-precision potentiometer, its accuracy and linearity are greatly enhanced leading to an extended service life. Waterproof Protection Crafted with high precision and thorough sealing, this servo provides an exceptional level of water resistance. This allows it to operate even in the presence of water splashes. 180° Rotation The controllable angle range of the steering gear is 180 degrees, with good linearity and accurate control. It can be rotated 360 degrees when the power is off. 180° Rotation The controllable angle range of the steering gear is 180 degrees, with good linearity and accurate control.It can be rotated 360 degrees when the power is off. Specifications Item Specification Product weight 0.15Ib/ 66g Product size 1.57*0.8*1.59inch/ 40*20*40.5mm Rotation speed 0.20sec/ 60°(7.4V) Stall torque 25 kg·cm (277.6 oz·in) @7.4V Working Voltage 6-8.4V Stall current 2.4~3A No-load Current 100mA Servo Horn 25T Servo Wire 30cm(11.8inch) in length Control Method PWM pulse width control PWM pulse width range 500~2500us, corresponding to 0~180° Duty Ratio 0.5ms~2.5ms Pulse Period 20ms Wire Layout red wire: +; black wire: GND; white wire: PWM/signal Rotation range 0~180° Servo accuracy 0.3°

Miuzei 20KG Servo Motor High Torque RC Servo Metal Gear Waterproof for R/C Model DIY Car Robot, DS3218, Control Angle 270° : Toys & Games

Readytosky 20KG Digital Servo High Torque Full Metal Gear Waterproof Servo 180 Degree with 25T Servo Horn for RC Toys Model : Toys & Games

Hiwonder Robotic Servo & Controller

Hiwonder 25KG High Torque Digital Servo Motor Full Metal Gear, Metal Case Servo Waterproof for RC Mode DIY,Control Angle 270° : Toys & Games

Miuzei 20KG Servo Motor High Torque RC Servo Metal Gear Waterproof for R/C Model DIY Car Robot, DS3218, Control Angle 270° : Toys & Games

Miuzei 20KG Servo Motor High Torque RC Servo Metal Gear Waterproof for R/C Model DIY Car Robot, DS3218, Control Angle 270° : Toys & Games

Important: 1. Connect GND is necessary. 2. Its recommended that use lithium polymer battery with high rate discharge(min 5C), please dont use dry battery. 3. Please use a short and thick power cord, dont use Dupont cord 4. Not compatible for redcat thunder drift rc car, not compatible for 1/16 scale car.

20kg Digital Servo Full Metal Gear High Torque, Aluminium Case for Robot DIY (Control Angle 180)

Hiwonder LD-25MG Full Metal Gear Standard Digital Servo with 25kg High Torque, Aluminium Case for Robot RC Car(Control Angle 180)

Hiwonder LD-20MG Full Metal Gear Digital Servo with 20kg High Torque for Robot RC Car – Oz Robotics