T-88 Structural Epoxy Adhesive - System Three Resins
T-88 is a high-performance, non-brittle, two-part epoxy adhesive designed to give superior results under adverse conditions.
System Three Resins: T-88
For well over 25 years T-88 has been the most widely used structural adhesive for marine and general woodworking use in the United States. Mixed at a 1:1 by volume ratio, T-88 will cure at temperatures as low as 35oF. When fully cured, it is unaffected by water, oil, kerosene, and many other chemicals. It will not stain wood and is immune to fungus and rot. T-88 is unique in that it may be applied to damp wood, provided it is worked well into the surface.
System Three 1100K90 Amber T-88, 50 ml Cartridge, 1.69 oz. Bottle
What type of Epoxy? LumberJocks Woodworking Forum
System Three Quick Cure 15 Epoxy sets in 15 minutes. This makes it perfect for those wanting a faster set time for larger projects or just needing extra time for multiple glue-ups, fitting and clamping. Two-bottle kit (hardener and resin) with an easy 1-to-1 mixing ratio makes it hard to mess up. Be advised heat or lack of can affect cure time, but quality ingredients enable it to come pretty close to 15 minutes, so there arent any surprises when using it.
System Three 1010K10 Quick Cure 15, Kit, 1/2 Pint, Amber
System Three Resins 1100K10
MetlWeld is a super tough epoxy adhesive designed to bond dissimilar materials such as steel to wood. MetlWeld exhibits excellent elastic properties and superior bond strength while remaining rigid. MetlWeld will bond to stainless steel, galvanized steel, aluminum, copper, glass, ceramic, neoprene rubber and most porous surfaces. For use in high stress applications when bonding metals to materials such as glass, composites, wood and concrete. 100% waterproof.
System Three Metlweld Epoxy Adhesive, 8oz Kit
T-88 Structural Adhesive by System Three
T-88 is a high-performance, non-brittle, two-part epoxy adhesive designed to give superior results under adverse conditions. The adhesive may be used without modifications in normally fitted joints, and will cure in any thickness without shrinkage. T-88 is clear amber and becomes virtually invisible when varnished. T-88 exhibits outstanding adhesion and permanence on a wide variety of materials, and is endorsed by leading designers, builders and organizations.
System Three 1100K10 Amber T-88 Kit 0.5 Pint Bottle
Epoxy - System Three Epoxies - System Three GP Epoxies - System
The Epoxy Gun is the core of System Three Goof Proof Epoxy System, which brings ease of mixing and dispensing together in one system. It all begins with the Goof Proof Epoxy Cartridge that contains one of System Threes 1-to-1 ratio mix epoxies.
System Three Goof Proof Epoxy Gun #3600S90
Blade Pro Epoxy Adhesive is a two-component, high-performance glue designed specifically for the knife maker. This state of the art adhesive forms super tough, flexible bonds to wood, Micarta, G10, and other composites. Tenacious bonds are developed to non-ferrous metals, as well as stainless, and carbon steel. Blade Pro Epoxy Adhesive is low in viscosity and is easy to spread. Because of its lower viscosity, it is suitable for both full and hidden tang applications.
System Three T32606 - Blade Pro Epoxy Adhesive, 4 oz. Kit
For well over 25 years T-88 has been the most widely used structural adhesive for marine and general woodworking use in the United States. Mixed at a 1:1 by volume ratio, T-88 will cure at temperatures as low as 35oF. When fully cured, it is unaffected by water, oil, kerosene, and many other chemicals. It will not stain wood and is immune to fungus and rot. T-88 is unique in that it may be applied to damp wood, provided it is worked well into the surface.
System Three 1100K90 Amber T-88, 50 ml Cartridge, 1.69 oz. Bottle
System Three Resins: T-88
In addition to wooden boat building, System Three is consistently used for applications like the repair of cracked concrete oil well linings in Alaska, lobster tank linings, pianos, guitars, and outside wooden signs and furniture. Resin and hardener are mixed in an easy 2:1 volume mixing ratio and may be mixed with fillers for better flow control and gap filling applications. Medium hardener refers to the speed at which the epoxy cures.
System Three General Purpose Medium Hardener - Pint
T-88 Structural Epoxy Adhesive - System Three Resins
