CAT7 600Mhz 10 Gigabit F/FTP Shielded RJ45 Network Ethernet Cable

4.8

(282)

Écrire un avis

Plus

€ 8.50

Ajouter au panier

quantité

En Stock

Description

Our range of Cat7 cables run much faster Cat 6 or Cat5 cables but are backwardly compatible. Our range of Cat 7 cables have double shielding to eliminate cross talk and interference [see below for full description]
Our range of Cat7 cables run much faster Cat 6 or Cat5 cables but are backwardly compatible. Our range of Cat 7 cables have double shielding to eliminate cross talk and interference. Referred to as F/STP under the sheath lies a foil shield and then underneath this each twisted pair is also inside a foil shield. Perefect for the latest in 4K TVs Gaming Consoles Macbooks PC s Laptops Notebooks CCTV Access Points Range Extenders and any other device that uses the RJ45 connection. So what s the difference between Cat 5e Cat 6 and Cat 7 cables? There are two main factors to look at when comparing network cables. The first is the speed (bandwidth) and the other the frequency (MHz). The Speed determines how much data (bandwidth) can be sent through the cable. Cat 7 cables have a maximum speed/bandwidth of 10 000 Mbit/s but Cat 6 carries a lower 1000Mbit/s and the cat 5e range of cables carry up to 1000Mbit/s. The Frequency or MHz indicates how often the signal can pass through the cable. Cat 7 cables have a very high frequency at 600Mhz but Cat 6 only has 250Mhz and Cat5e 100Mhz. Overall a Cat 7 cable will allow more bandwidth at a faster rate than the previous Cat 6 or Cat5e Cables. Cat5e Has a speed to 1000 Mbit/s 100mhz Cat6 Has a speed to 1000 Mbit/s 250mhz Cat6a Has a speed to 10000 Mbit/s 500mhz Cat7 Has a speed to 10000 Mbit/s 600mhz FULL COPPER Shielded Cable Our range of Cat7 Cables have a double shielding (F/FTP) to eliminate the chance of cross talk and interference from near by devices. These cables are made from full copper strands delivering super fast speeds to your gaming console TV PC Laptop Mac amongst other devices. Full copper cables are suitable for POE devices such as Access points WIFI Range extenders CCTV or networking switches that need to carry power via the Ethernet cable to a POE port. up to 10000 Mbit/s and 600Mhz Transfer Speeds Backwardly compatible with Cat6a/Cat6/Cat5e/Cat5e Ports Available in a range of lengths REACH Compliant Double Shielded Cable to eliminate cross talk and interference ROHS Compliant F/FTP DOUBLE SHIELDED Cable Suitable for POE (Full Copper Cable) 6mm overall diameter (Cable clips QS: 004770 or 004500) Gold flashed ends We would always recommend to test your cables before you install.