Looking for a high quality and durable filament for your 3D printing projects? Try our Frost White PLA+Silk filament which offers a smooth and silk-like finish.
Experience a Superior 3D Printing Experience with Frost White PLA+Silk Filament
PLA+Silk gives a glossy shine to anything you print with it. It looks great, is extremely easy to print with, and has generally good mechanical properties. It's perfect for showpieces and decorative models.Coex 3D PLA+Silk is made with Virgin NatureWorks USA Ingeo resin, a high-quality colorant, and our secretive additive. All of Coex's filament is made in our production facility located in Wisconsin, USA. Coex 3D uses industrial-grade extruders and laser measuring quality control to ensure quality, consistency, and a 1.75±0.03mm diameter specification with every spool. We provide filament that gives excellent-looking and strong prints.
Coex 3D recommends the following print settings when printing with our PLA. Settings will vary depending on your specific printing setup.
Hotend Temperature: 215 °C - 235 °C
Important! This temperature range may seem hotter than you're used to for other PLA+Silk filaments. Using 100% virgin resin causes our PLA+Silk to require slightly higher printing temperatures.
Heated Bed Temperature: 40 °C - 60 °C
Note: A heated bed is not a strict requirement when printing PLA+Silk, but using one is recommended.
Recommended Build Surfaces/Adhesives
Glass Build Surface
PEI Build Surface
Magigoo
Painter's Tape
Glue Stick
Cooling Fan: Recommended. Up to 100% fan speed is advisable when printing PLA+Silk.
Drying: PLA+Silk filament is hygroscopic and will absorb moisture from the air if not stored in a dry environment. If this happens, you may experience under-extrusion/inconsistent extrusion or excess stringing. You may also hear a popping sound coming from the hotend during printing. We recommend drying our PLA at 55 °C for at least 3 hours if it has been exposed to excess humidity.
Silk PLA Filament 1.75mm, Shiny White 3D Printer
iSANMATE High-Speed PLA 3D Printer Filament 1.75mm
EL3D® PLA, Metal Like Aluminum Filament, 1Kg, 1.75 – Envirolaser3D
Formfutura Silk Gloss PLA Brilliant Beige - 1.75 mm
AzureFilm Silk PLA Sky Blue 1Kg
JAYO 5KG PLA Matte White Filament 3D Printer 1.75MM Non-glossy
Best Silk Like 1.75mm 3mm ABS PLA 3D Printer Filament Supplier 1kg
Bundle Offer PLA Meta filament 3D Filaments, 1kg/2.2lbs.
Matte PLA 3D Printer Filament 1.75mm -Overture 3D
Silk Shiny Color: Our Silk Series PLA 3D Filament, It Makes the Filament with Silk Shiny Luster after Printing, Without Polishing, You will get the
Silk White PLA 3D Printing Filament, Silk Shiny PLA 1.75mm 3D Printer Filament, Widely Support 3D Printer/3D Pen, 1kg 2.2lbs Cardboard Spool Silk
Ataraxia Art Fire Red Silk PLA Filament,3D Printer Silk Gold