Prime-Line Roulettes tandem de 1-1/4 po, bord concave, roulements

N 6685 - Wood Closet Door Roller, 1 inch concave roller, Bottom Mount, Pack of 2

Sliding Patio Door Rollers 1-1/4 Inch Sliding Door Tandem Roller Assembly Sliding Glass Door Rollers Replacement Sliding Door Wheel Replacement, for Sliding Glass Door Screen Door Gate Window (2 Pack)

Prime-Line 1-1/4 in., Steel, Sliding Door Tandem Roller Assembly with F-Tab D 1845 - The Home Depot

Plain back tandem roller assembly with two 1-1/8 inch concave steel ball bearing rollers. The stamped steel housing is adjustable. Used by MIlgard as well as other manufacturers primarily on vinyl patio doors. The housing is 3/4 inches wide and 1 inch tall with a 1/4-20 threaded mounting hole on the back end and an optional use 10-32 threaded hole on the top.

Prime-Line D 1791 Sliding Door Roller Assembly - 1-1/8 inch Tandem Steel

SLIDING DOOR ASSEMBLY – Replace or repair broken or missing sliding door rollers with this adjustable tandem roller assembly PATIO DOOR ROLLERS – This

Prime-Line D 1858 Steel Sliding Door Roller Tandem Assembly with 1-1/4 Inch Steel Ball Bearing, Golden, Set of 1

This is a F-tab tandem roller assembly with two 1-1/8 in. steel ball bearing rollers. When the corner screw passes through the F- tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The adjustable stamped steel housing is 11/16 in. wide with a flare width of 7/8 in., 1-1/16 in. tall and 3 in. long. It has a low carriage allowing for easy door removal. Used by Merzon and a variety of other patio door manufacturers.

Prime-Line Sliding Door Tandem Roller Assembly - 1-1/8 inch - Steel

Prime-Line D 1735 Roller Assembly, 1-1/4 In. Tandem Wheels, Concave Edge, Ball Bearing (Single Pack) - Replacement Appliance Fastener Hardware

Sliding Patio Door Rollers 1-1/4 Inch Sliding Door Tandem Roller Assembly Sliding Glass Door Rollers Replacement Sliding Door Wheel Replacement, for Sliding Glass Door Screen Door Gate Window (2 Pack)

This is an F-tab tandem roller assembly with two 1-1/8 inch concave steel ball bearing rollers installed. When the corner screw passes through the F-tab, the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The adjustable stamped steel housing is 11/16 inch wide with a 13/16 inch flare, 1-1/8 inch tall and 3-1/8 inch long. Used by a variety of sliding patio door manufacturers.

Prime-Line D1845 Tandem Roller Assembly

Prime-Line Roller Assembly, 1-1/4 in. Tandem Wheels, Concave Edge, Steel Ball Bearings, Adjustable D 1607 - The Home Depot